o Burned downloaded slackware image:
cdrecord::
bash-2.05a# cdrecord -v speed=20 dev=0,0,0 -data /home/flo/slackware/slackware-8.1-iso/slackware-8.1-install.iso
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'RICOH '
Identifikation : 'CD-R/RW MP7200A '
Revision : '1.02'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 657 MB
Total size: 755 MB (74:48.34) = 336626 sectors
Lout start: 755 MB (74:50/26) = 336626 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 359849 (79:59/74)
Disk type: unknown dye (old id code)
Manuf. index: 81
Manufacturer: ILLEGAL OLD CODE: Old Ritek Co.???
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 23223
Starting to write CD/DVD at speed 12 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 657 of 657 MB written (fifo 100%).
Track 01: Total bytes read/written: 689405952/689405952 (336624 sectors).
Writing time: 381.604s
Fixating...
Fixating time: 22.603s
cdrecord: fifo had 10859 puts and 10859 gets.
cdrecord: fifo was 0 times empty and 10761 times full, min fill was 89%.
o **--> success!!!**
Next try: Burn a backup-cd of a prepared dir:
o Created an image for burning with mkisofs::
mkisofs -r -o image.iso /backup
[...]
98.47% done, estimate finish Tue Jul 16 19:26:57 2002
Total translation table size: 0
Total rockridge attributes bytes: 415
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 4f24
294512 extents written (575 Mb)
o Started burning process with *cdrecord*::
bash-2.05a# cdrecord -v speed=20 dev=0,0,0 -data /backup/backup-020716.iso
[...]
Performing OPC...
Starting new track at sector: 0
Track 01: 575 of 575 MB written (fifo 100%).
Track 01: Total bytes read/written: 603160576/603160576 (294512 sectors).
Writing time: 334.958s
Fixating...
Fixating time: 22.496s
cdrecord: fifo had 9501 puts and 9501 gets.
cdrecord: fifo was 0 times empty and 9417 times full, min fill was 89%.
Prepare regular backup
o create tar archives from home, etc and other dirs::
tar -zcvf home-flo.tgz /home/flo/
tar -zcvf etc.tgz /etc
o create image::
mkisofs -r -o backup-020903.iso /backup
o create backup cdrom::
cdrecord -v speed=20 dev=0,0,0 -data /backup/backup-020903.iso
Copy cd
o copy complete cd on harddisk
o create iso filesystem
o create cdromDie Formattierung stammt von Zope stx, es ist ein Auszug aus meinem ZWiki. Code examples können ua.durch 'Example::' +Leerzeile und dann Einrückung eingeleitet werden. Ich wollte es erstmal nicht komplett umformatieren, sondern sehen, ob es so auch schon geht. Siehe auch: http://openspirit.homelinux.net/noowiki/LinuxHowtoCdWriterReport --FlorianKonnertz,11-02